Li-po Rx Packs

High performance and light weight Lipo packs used in conjunction with the appropriate voltage regulator can be less than a third of the weight of nicad or nim packs

That means you could fit and have the security of a duel Rx pack set-up and still save weight!

Fitted with both a balance lead and high quality Uni connector that should suit most radio types

A rule of thumb is that you should have at least an Rx pack of 150 ma capacity for each std servo and 300ma for each digital servo installed for a ten min flight

You should charge at 1c and all cells can cope with in excess of a 10c discharge, its usaly the lead that dictates the limit not the Rx pack! Dule leads available please feel free to ask

Always check pack voltage under load and before not after the voltage regulator  

1000ma L=67mm x W=34mm x D=11mm

1600ma L=85mm x W=34mm x D=11mm

2200ma L= 106 x W=35 x D=14

3200ma L=139 x W=42mm x D=15mm

Lipo cells "Must" be charged with the appropriate charger if in doubt please feel free to ask