Heavy Duty control Horn for larger Airframes up to 35%
Strong 4mm bolt with alloy support cone for minimum flex
Long clevis allowing the pivot point to coincide with the hinge line and fitted with a Ball Link to absorb the side swing of the push rod were the servo is not mounted perpedicular to the control surface
Large Alloy washer to spread the load on the control surface with a Knuckle joint giving a flush fit to tapered control surfaces
Drilled to accept 4/40 or 3mm push rod ends
Bolt Lengh=50mm Clevis Reach=12mm
Only 13g
.jpg)
.gif){kind=small}
.gif){kind=small}
.gif){kind=small}
