Beautifully engineered from aircraft quality aluminium and fitted with a precision ballrace "these horns are as good as it gets"
No more slop or binding allowing your servos to be used to their full potential assuring many seasons of reliable flying
The well proportioned "Tri-base" spreads the load to the control surface and can be fixed with countersunk screws that are supplied
The 2mm pin has a 2.5 mm thread to the back just behind the head so the bearing has a smooth shaft takeing the load
Do not be tempted to spread the clevis to remove it from the horn but simply unscrew the pin
The clevis is bored to accept a 2.5mm rod end but can be drilled to use 3mm or 4/40 fittings
Size from base to centre of ballrace is 22mm
Base fixing holes are 18mm across and 20mm deep
Weight is a mere 3.3 grams!
.jpg)
.gif){kind=small}
.gif){kind=small}
.gif){kind=small}
